Purifiers
activated carbon
Activated carbon purifiers are machines that are used to treat the odorous air taken from kitchen hoods, but they can also be used for the treatment of industrial chemicals, if other adsorbents are used instead of classic activated carbon, with a specific chemical reactivity.
Purifiers
with activated carbon
Odorous air treatment
for kitchen hoods
Contact us with confidence and we will find together
the best solution to your needs.
Tailor-made solutions.
How active carbon purifiers work
Activated carbon purifiers have different filtration stages, gradually finer, in order to progressively capture particles of different sizes; we pass from the first filter, class G4 for coarse dust, to the F7 pocket filters for fine dust, and then to activated carbon for fine odorous particles.
The filters offer a certain resistance to the passage of air, so the latter must be forced through them with a fan, placed downstream of the filters themselves, inside the same filter box or in a different arrangement if the dimensions are impose this solution.
In principle, the slower the air flows inside the filters, the better the filtering and the lower the power expenditure. To optimize the work of the fan, in addition to keeping the filters clean, it is therefore recommended not to over-use the filtering unit, or rather not to let it suck in a quantity of air higher than that of the project; otherwise this would end up wearing out the fan motor and not making the filters work at their best.
It is also advisable to limit the amount of air sucked in to the strictly necessary, placing the hood on the wall and, if possible, closing it at the sides.
Comparative table of models
Activated carbon purifiers
without BFSM motor
Activated carbon filters are preferred for the deposition of harmful gases, vapors and bad smells. Typical applications are found for example: in the treatment of odors in restaurants, the chemical industry, paint shops and in laboratories. They are also used in public spaces such as airport terminals.
They are suitable for filtration and deodorization and are composed of cartridges containing activated carbon + synthetic prefilter
corrugated.
Pre Filtering; G4 filters (EN 779: 2012) Am _> 90% and with the maximum number of activated carbon cartridges that can be contained in the control units and with a greater thickness of 3.5 cm per cartridge. measures 140mm X 70mm X 400mm
An activated carbon purifier consists of a structure of extruded P40 aluminum profiles and nylon corners. The faces of the box thus obtained are in sandwich paneling, 25 mm thick, consisting of aluminum sheet (0.5 mm thick) and polyurethane foam between the two sheets.
Models
With BFSM.AP static cartridges
The activated carbon purifiers with static cartridges are filter boxes for high performance BFSM.AP. They are built like the BFSM boxes but have in addition a filter of the F8 floppy pocket type with a pocket at 610 mm and an increase in size by 700 mm.
or rigid pocket F9 and increase of the measures towards the BFSM of 300 mm
Models
Code BFSM.AP 15
Soft pocket measures 42 X 73 X 150 mm
Rigid pocket measures 42 X 73 X 110 mm
Code BFSM.AP 30
Soft pocket measures 73 X 73 X 150 mm
Rigid pocket measures 73 X 73 X 110 mm
Code BFSM 45
Soft pocket measures 73 X 103 X 150 mm
Rigid pocket measures 73 X 103 X 110 mm
Guaranteed and fast product. After-sales assistance.
Code BFSM 15
Carbon cleaners without motor 1700 m³ / h
External dimensions 42 x 73 x 80 cm
The pre-filtering is entrusted to the G4 filters, corrugated filter (nr. 1 filter),
size 287x592x48 mm (EN 779: 2012) Am _> 90%
It follows with cylindrical activated carbon cartridge filters.
(nr 8 filters) cartridge dimensions 140 x 70 xh 40 cm with plate dimensions (PCG-1/8) 307 x 610 x 48mm
Code BFSM 30
Carbon cleaners without motor 3400 m³ / h
External dimensions 73 x 73 x 80 cm
The pre-filtering is entrusted to the G4 filters, corrugated filter (nr. 1 filter),
measures 592 x 592 x 48 mm (EN 779: 2012) Am _> 90%
Follows with cylindrical activated carbon cartridge filters (nr. 16 filters) cartridge dimensions 140 x 70 xh 40 cm
with plate size (PCG-1/8) 610 x 610 x 48 mm
Code BFSM 45
Carbon cleaners without motor 5100 m³ / h
External dimensions 42 x 73 x 80 cm
The pre-filtering is entrusted to the G4 filters, corrugated filter (nr. 2 filters)
(1) measures 592 x 592 x 48 mm + (1) measures 287x592x48 mm (EN 779: 2012) Am _> 90%
It follows with cylindrical activated carbon cartridge filters.
Nr 24 filters, cartridge dimensions 140 x 70 xh 40 cm with plate dimensions (PCG-1/8) 610 x 610 x 48 mm
+ nr1 filter (PCG-1/8) with measures 307 x 610 x 48 mm