AH 200
Soot and fat eliminator
Certified machine
User manual
Data sheet
IMQ certified product: NO. IMQ 242
Our soot eliminators use double washing technology, of the Enterprise category, plus the rollé system (new 2018). ​
Ideal for the treatment of 1 pizza oven with a capacity of 4-5 pizzas at the same time
NOISE
The A-weighted noise emission level, measured at 1m from the surface of the machine and 1.6 meters above the ground, does not exceed 70 dB (A).
Dimensions
Length 745 mm
Depth 560 mm
Height 670 mm
Smoke inlet and outlet Ø 200 mm
Air flow 200 m³ / h without fan
(air inlet velocity 3.7 m / s)
Fans can be installed from 0.37 to 0.50 kw with a maximum air flow rate of 800 m³ / h
Very low electrical power 0.50 kw
Pump type: Grundfos 3-3 cm
Water consumption: about 42 liters, to be replaced at each work cycle; float for automatic water refilling and level management. ​
Constructed in 304 stainless steel
​
The Clinear 250L soot suppressors
they are built to eliminate carbonaceous particles (soot) and impurities of various kinds from combustion fumes.
The AH 200 soot eliminators are used where it is necessary to purify the exhaust smoke from non-toxic waste before introducing it into the environment;
Finds main application in the treatment of fumes for small charcoal grills, wood ovens, pellet and wood stoves, biomass boilers and other combustors with carbon residues and particulates.
The model described has a double washing system.
The washing water can be disposed of in the sewer system.
Steam-saturated air comes out of the machine, with a temperature of about 50 degrees, free of carbonaceous particles and suspended impurities (95% reduction).
Odors are reduced by 60-70%.
Technical features and information:
An equipment capable of removing and breaking down the microparticulate with a yield of over 95%.
One of a kind.
Automatic operation with recycled water
Equipped with a thermometer for measuring the temperature.
Pressure gauge, pump Water mains pressure gauge
Tap and rubber for washing and cleaning the built-in blast chiller.
Exceptional in managing its own cleaning (once every 6 months.
Stainless steel drains including valve with "off-on" indications.
Packaging dimensions and weight
​
Length 790 mm
Depth 610 mm
Height H. 820 mm
WEIGHT: 50 kg
Contact us for information
more detailed
on
this product